Nortel-networks T7316 User Manual download pdf (Page 49)

Chapter 3 Make a call 49

Telephone Features Programming Guide

Automatic dial

Automatic dial allows you to dial a number without selecting a line. Your prime line is selected

when you start dialing a number. Automatic dial does not work if your telephone has no prime line

or when your prime line is in use.

Telephones connected to an Analog Terminal Adaptor (ATA2) or an Analog Station Module

(ASM) cannot use Automatic dial.

Pre-dial

Pre-dial allows you to enter a telephone number, check it, then change it before making the call.

The call does not dial until you select a line or line pool, or pick up the handset. You can pre-dial

both external and internal numbers. You must, however, select the correct type of line (external or

internal) for the type of number you have entered.

Receive a busy signal on an internal call

When the internal number you dialed is busy, there are three possibilities:

• Priority Call

• Ring Again

• Message

Priority Call

If you get a busy signal or a Do Not Disturb message when you call someone in your office, you

can interrupt their call by using the Priority Call feature. Use this feature for urgent calls only.

Program a telephone to make priority calls (Unified Manager Programming)

You need to start a Unified Manager session to program this feature. For more information about

programming using Unified Manager, see the Business Communications Manager Programming

Operations Guide.

Note: If your telephone starts ringing while you are pre-dialing a number, you can stop

the ringing by turning on Do Not Disturb (≤°ﬁ). When Do Not Disturb is entered

while you are dialing, the numbers you are entering are not affected.

You cannot pre-dial a telephone number if all the lines on your telephone are busy.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 187 188

No comments

Nortel-networks T7316 User Manual Page 49