Nortel-networks 450 User Manual download pdf (Page 146)

Using the BayStack 450 10/100/1000 Series Switch

3-14

302401-D Rev 00

Read-Write

Community String

The community string used for in-band read-write SNMP operations.

Default Value private

Range Any ASCII string of up to 32 printable characters

Trap #1 IP Address

Number one of four trap IP addresses. Successive trap IP address fields are

numbered 2, 3, and 4. Each trap address has an associated community

string (see Community String).

Default Value 0.0.0.0 (no IP address assigned)

Range Four-octet dotted-decimal notation, where each octet is

represented as a decimal value, separated by a decimal

point

Community String

The community string associated with one of the four trap IP addresses (see

Trap #1 IP Address).

Default Value Zero-length string

Range Any ASCII string of up to 32 printable characters

Authentication Trap

Determines whether a trap will be sent when there is an SNMP

authentication failure.

Default Value Enabled

Range Enabled, Disabled

Link Up/Down Trap

Determines whether

Link Up

Link Down

traps will be sent from the switch.

Default Value Enabled

Range Enabled, Disabled

1 The Trap IP Address and Community String fields can be set using a MIB table (in a Nortel Networks proprietary MIB).

The status of the row in the MIB table can be set to Ignore. If the row status is set to Ignore, the fields appear to be set

when viewed from the console terminal; however, no traps will be sent to that address until the row status is set to Valid.

Table 3-3. SNMP Configuration Screen Fields

(continued)

Field Description

kombk.book Page 14 Tuesday, June 29, 1999 3:25 PM

1 2 ... 141 142 143 144 145 146 147 148 149 150 151 ... 289 290

No comments

Nortel-networks 450 User Manual Page 146