Nortel Networks 400-S User Manual download pdf (Page 80)

80 Appendix B Adapter cable pinout diagrams

209375-A

Remote access adapter cables

If you want to connect a PC or dial-up modem directly to your Instant Internet

400-S unit to configure the unit using remote access commands (out-of-band

management), you must provide the connection cable. These are standard cables.

You can have a cable made according to the pinout diagrams in this appendix or

you can purchase the cable from any computer supply store.

For more information on configuring your unit remotely, refer to Reference for the

BayStack Instant Internet Remote Access Commands Version 7.11.

Null modem adapter (PC-to-PC) cable

Figure 17 shows the pinout settings for a null modem adapter cable (also referred

to as a pc-to-pc file transfer cable). This serial cable must have two DB-9 female

connectors.

Use a null modem cable to connect a PC to the Instant Internet unit’s AUX port

for out-of-band management.

Figure 17 Null modem adapter cable pinout diagram

9959EA

CTS

RTS

DTR

DCD

DSR

GND

DB-9 Connector

(Female)

DB-9 Connector

(Female)

RTS

CTS

DSR

DCD

DTR

GND

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 86

No comments

Nortel Networks 400-S User Manual Page 80