Nortel Networks 5000I User Manual download pdf (Page 48)

4. Scanner Checkout

This chapter discusses the procedures for scanner checkout, pre-installed system software,

system verification and backup, and customer hand-off.

Scanner Checkout Procedures{ XE "Scanner,

5000i:Checkout procedures" }{ XE "Software

checkout" }

To checkout the 5000i scanner, refer to the following sections in the Maintenance Manual for the

5000i

Scanner.

1. Hopper and Stacker Operational Checkout (Section 2.6)

2. Sensor Checkout Procedures (Section 2.8)

3. Read Station Adjustments (Section 3.2)

4. Check Alignment test (Section 5.2.4.8)

5. Hopper Height Adjustments (Section 3.5)

6. Pick Area Adjustments (Section 3.3)

7. Calibrating (and Normalizing) the Scanner (Section E.2)

System Software

5000i scanner system software is pre-installed at NCS Pearson. For information regarding this

software{ XE "Checkout:Software" }, refer to the following publications:

• Image ScanTools™ for 5000i

Scanners - includes information on installation, setup, and

configuration. Error messages are not documented in this publication. Error messages are

displayed in On-Line Help.

• NCS Accra™ - includes information on installation, setup, and configuration. Error messages

are not documented in this publication; error messages are displayed on Online Help.

System Verification{ XE "Checkout:System

verification" }

This section describes how to update the 5000i scanner system software.

Requirements

You need to have an additional 90 to 100 MB of disk space if you intend to maintain a copy of the

old and new software.

Page 36 5000i Scanner Installation Guide

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 54

No comments

Nortel Networks 5000I User Manual Page 48