Chapter 7 Using Log Manager 169
Using Optivity Switch Manager, Release 1.1.0.0
Figure 82 Telnet window
4 To begin the Telnet session, enter your login name and password, for
example:
Login: rwa
Password: *** (rwa)
When you have accessed the CLI, you use the copy command to upload the file.
Uploading the syslog file
To use the copy command to upload a file:
copy <srcfile> <destfile>
where:
srcfile is the file name or number of the source file in flash, pcmcia,
config, nvram, tftp, or trace.
destfile is the file name and path, including the IP address of the
management station.
For example, the following command copies a syslog file to the management
station located at IP address 10.170.137.105:
copy /pcmcia/syslog.txt 10.170.137.105:syslog.txt
Enter:
************************************
* Nortel Networks, Inc. *
* Copyright (c) 1996-2000 *
* All Rights Reserved *
* Passport 8010 *
* Software Release _B047 *
************************************
Login:
Comments to this Manuals