Nortel Networks Passport 4430 User Manual download pdf (Page 1)

210140-A Rev 00 May 2000

Passport 4430, 4450 and 4455

Installation Instructions for the Release 4.0, 16 MB Flash Memory

This instruction sheet will guide you through installing the Release 4.0, 16 MB

Flash Memory SIMM in the Ethernet Base Module (EBM), of the Passport 4430,

4450 and 4455. This SIMM includes the Release 4.0 boot code.

There are two SIMMs that can be used to upgrade the Passport:

• 16 MB Flash SIMM (NTJ778AA) - used in the Passport 4430/4450

• 16 MB Flash SIMM (NTJ779AA) - used in the Passport 4455

Note: Both SIMMs are identical in appearance; be sure to check the

PEC number (NTJxxxAA) that is printed on the label to

ensure you have the correct SIMM for the EBM you are using.

If the incorrect SIMM is used, the system will not work.

1. Remove the power from the unit.

2. Remove the four (4) cover screws

(two (2) on each side of the unit).

3. Slide the cover toward the rear of

the unit and lift off.

4. Disconnect any external cables

that may be connected to the

unit, and remove any expansion

module rear panels and blank

panels (if no expansion modules

are present, proceed with step 6).

Caution:

The Passport contains electrosensitive components which may

suffer damage due to static discharge. Either wear a grounded wrist

strap or ground yourself by touching the chassis.

Cover

Screw (4)

1 2

Summary of Contents

Page 1 - Passport 4430, 4450 and 4455

1210140-A Rev 00 May 2000Passport 4430, 4450 and 4455 Installation Instructions for the Release 4.0, 16 MB Flash MemoryThis instruction sheet will gui

Page 2 - '5F

Release 4.0, 16 Mbyte Flash Memory Installation Instructions 2'5F5. Remove the expansion modules by following this procedure:a. Tak

Comments to this Manuals

No comments

Nortel Networks Passport 4430 User Manual Page 1

Browse online or download User Manual for IP add-on modules Nortel Networks Passport 4430. Nortel Networks Passport 4430 User's Manual [en]

Summary of Contents

Comments to this Manuals